Global Journal on Quality and Safety in Healthcare

: 2018  |  Volume : 1  |  Issue : 2  |  Page : 25--27

Research versus quality improvement in healthcare

Khaled Al-Surimi 
 School of Public Health, Faculty of Medicine, Imperial College London, London, United Kingdom; College of Public Health and Health Informatics, Department of Health Systems and Quality Management, King Saud bin Abdulaziz University for Health Sciences, Riyadh, Saudi Arabia

Correspondence Address:
Khaled Al-Surimi
Associate Editor-in-Chief, P.O.Box 3660, Riyadh 11481
Saudi Arabia

How to cite this article:
Al-Surimi K. Research versus quality improvement in healthcare.Glob J Qual Saf Healthc 2018;1:25-27

How to cite this URL:
Al-Surimi K. Research versus quality improvement in healthcare. Glob J Qual Saf Healthc [serial online] 2018 [cited 2019 Nov 15 ];1:25-27
Available from:

Full Text

We are pleased to publish the second issue of the Global Journal on Quality and Safety in Healthcare (JQSH). In this issue, we would like to discuss the similarities and differences between research and quality improvement (QI) projects in health care. Imagine you are working in a hospital or a department within a hospital and you want to improve an aspect of health-care quality and safety by focusing on the issue of medication errors. Given that situation, you decide to implement a “zero harm” rule because of medication errors. The question is will this be a QI or a research project? In another example, you are a resident working in an oncology department and you noticed that most patients receiving certain chemotherapeutic agents had neuropathy complications, so you decided to collaborate with the physical therapist on a project to compare patients who received chemotherapy drugs and exercise with those who did not exercise. Again, the question is will this be a research project or a QI project? Regardless of the answer, it is important to implement the project systematically. If your project is focused on QI, then you should consult the QI specialists in your hospital who can help you to use the appropriate QI methodology, which includes Plan, Do, Study, Act (PDSA) cycles. If your project qualifies as research, then you should consult a research methodologist and biostatistician regarding study design, sample size, and others and work with the institutional review board (IRB) to provide guidance and templates.

Many health professionals do not know how a research project differs from a QI project and when they complement each other.[1],[2],[3] Our traditional thinking is that quality and safety improvement in health care as well as the effectiveness of an intervention can only be studied in the form of a traditional scientific research project, as it has its own well-established rigorous approach. We may be ignorant or unaware of how to use the QI scientific approach to study the performance of a health-care system.[4],[5] The problem lies within our frame of thinking because we are prioritizing the proof of effectiveness over bringing about and sustaining improvement. We use the results of pre-assessment and post-assessment research as the gold standard for evidence-based policy and practice, whereas in reality, sustaining the improvement is continuous and more dynamic.[1],[6]

Research projects are question-driven and focus on providing proof of effectiveness. The main purpose of research is to generate new generalizable knowledge about a particular subject to a study population, where the study results often end up published in academic journals. In this case, researchers must follow a strict study protocol approved by the IRB, including obtaining the consent from study participants before starting the project and report any deviation from the protocol to the IRB, if needed.[7],[8],[9] However, QI projects are data-driven and focus on showing sustained improvement to a specific process and system or outcomes within a health-care organization using, if possible, the research evidence generated as the basis for developing the improvement interventions.[10] A QI project does not aim to generate new knowledge as a research project does, rather, it generates several learning lessons as to what actually works and does not work and why. A QI project produces empirical evidence to benefit other organizations within a similar context and setting, which are interested in replicating the change to improve a process or system using the rapid PDSA cycle approach.[11] Through cycles of testing, we learn what is going to improve and why, without the need to generalize the results to another context, as research projects usually aim to do. Also in QI projects, the measurement framework is not about pre and post. It is about continually measuring the metric of interest that you want to improve and coming up with not just one intervention but multiple interventions based on learning from prior PDSA cycles. At the end, you reach the point of realizing sustained improvement through a series of interventions that were informed by testing in the actual system that you want to improve. The PDSA cycle is repeated, and new changes are made to continue to improve a process and, ultimately, the outcome. The essential measurements included in a QI project are process measures, outcomes measures, and balancing measures, which are used to show that the improvement occurs over time. Data from QI activities are usually aggregated and presented in run/control charts, histograms, and line graphs, whereas data from research are analyzed using statistical tests such as t-test, chi-square test, and regression analysis, and then aggregated and presented in appropriate tables and/or graphs.

Typically, QI results are shared within the organization and might be implemented in other departments. The lessons learned from QI activities can be published; however, it must be clear to the readers that the project was for QI, not traditional research. Although a QI project does not require IRB approval, some organizations have QI committees that approve and coordinate QI project activities, and some organizations require articles to be approved before submitting for publication.

In summary, the sustained improvement realized in a QI project can be complemented and validated with a thorough research-based assessment of effectiveness.[12] We should not consider the proof of effectiveness the same as the proof of sustained improvement, but they both are very important. I would like to emphasize that both research and QI projects use scientific and systematic approaches, albeit different, but both methods are scientific and rigorous in their own ways. The aims, methods, and outcomes in research and QI projects are quite different. Hence, understanding the differences and similarities between research and QI projects will help to determine the right approach when designing and implementing the right project for the right purpose using the right method. [Table 1] is a snapshot comparison between QI and research with more focus on the project’s aim and method aspects.{Table 1}

In research projects, we can be guided by asking the following:

Do we have a clear question to be investigated and answered?

What do we hope to accomplish by answering the question?

What is currently known about the topic?

What are the risks and benefits for patients involved with the study of this topic?

What type of study design will be used (observational vs. experimental)?

How will the data be analyzed and presented (statistical tests, P-values, etc.)?

In QI projects, we can ask the following:

What is the magnitude of the quality problem based on available data?

What types of quality tools have been used to measure and assess the problem?

What is the measurement plan to be used during implementation of the project?

What types of changes/interventions will be tested during the PDSA cycles?

Has the proposed change/intervention been used in other health-care settings or reported in the literature?

Will the results of this project directly improve patient-care outcomes or processes?

Is the organization’s management supportive of the project and willing to dedicate employee’s time and supplies to do the project?

What is the sustainability plan for the results?

Financial support and sponsorship

The author disclosed no funding related to this article.

Conflicts of interest

The author disclosed no conflicts of interest related to this article.


1Hirschhorn LR, Ramaswamy R, Devnani M, et al Research versus practice in quality improvement? Understanding how we can bridge the gap. Int J Qual Health Care 2018;1: 24–28.
2Fox J, Bagley L, Day S, et al Research and quality improvement experience and knowledge: A nursing survey. J Nurs Manag 2011;1:623–631.
3Jazieh AR. Why a new journal of quality and safety in healthcare? Glob J Qual Saf Healthc 2018;1:1.
4Cadilhac DA, Fisher R, Bernhardt J. How to do health services research in stroke: A focus on performance measurement and quality improvement. Int J Stroke 2018;1:166–174.
5Grol R, Baker R, Moss F. Quality improvement research: Understanding the science of change in health care. Qual Saf Health Care 2002;1:110–111.
6Doezema D, Hauswald M. Quality improvement or research: A distinction without a difference? IRB 2002;1:9–12.
7Harrington L. Quality improvement, research, and the institutional review board. J Healthc Qual 2007;1:4–9.
8Morris PE, Dracup K. Quality improvement or research? The ethics of hospital project oversight. Am J Crit Care 2007;1: 424–426.
9Stiegler MP, Tung A. Is it quality improvement or is it research?: Ethical and regulatory considerations. Anesth Analg 2017;1:342–344.
10Stausmire JM. Quality improvement or research—Deciding which road to take. Crit Care Nurse 2014;1:58–63.
11Foster J. Differentiating quality improvement and research activities. Clin Nurse Spec 2013;1:10–13.
12Margolis P, Provost LP, Schoettker PJ , et alQuality improvement, clinical research, and quality improvement research—Opportunities for integration. Pediatr Clin North Am 2009;1:831–841.